Capacitive Load: The controller is adaptive to resistive load inductive loI specially capacitive load such as a piezo vibrator.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real time to ensure constant preset feed speed regardless ofange of
the workpieces
Automatic Resonant Frequency Search: Search out and output resorant frequency of the load. other related parameters are also set automatic
RS485 Communication: All parameters of the controller can be adjusted via r$485.
Automatic Switch Sensor Type Recognition: The vibratory feeder controller can recognize and adapt to both PNP and NPN type switch sensors.
Sync output: Sync output wave form of the slave controller with that of the master controller to the same frequency and phase to avoid beat effect
Remote Speed Control: Output Voltage/Feed Speed of the controller can be adjusted remotely by an external potentiometer, a PLC, a 1-5V or 4-22mA T
Digital Overheat Protection: If internal temperature of the controller get too high, the controller will stop its output to protect Itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will stop its output to protect itself and the load
Restorable Short Circuit Protection: If output of the controlleris short-circuited, the controller will shut down its output to protect itthe load. But the fuse
inside will not be blown So when there is no short circuit at the outpuut side, the controller will work again after power on.
