SDMC20-S vibratory feeder controller is used to control a single-phase AC asynchronous mottor, it has abundant ports and logic functions, and its features include
Soft startup: When starting, the motor speed will gradually increase from zero to the set speed to eliminate the impact on the motor. Useers can set the soft startup time
according to their needs.
Soft shutdown: Added a soft shutdown function, which can be set to0.0~10.0 seconds to slowly stop the motor rotation.
Automatic speed stabilization: built-in digital PID control regulator to eliminate the influence of voltage fluctuation or load change on motor speed
Control output: The port supports NPN, PNP, or push-pull output mode, with over-current and short-circuit protection functions.
Switch sensor ports: 2 groups of overflow control ports, support NPN, PNP, or automatic adaptation type
Intelligent photoelectric port: The on/off delay and sensitivity of inteligent photoelectric sensors can be adjusted.
Motor stall protection: When the motor stalls, the controller stops output to protect the motor
There are up to three groups of logic signal sources for main outputand control output, users can freely combine them according to theirneeds
Password lock and parameter lock function: After the controller is debugged, the parameters can be locked to prevent misoperation by personnel
Various control objects: The parameters of the control objects can be adjusted to realize open-loop or closed-loop control of the motor, aand can also control the vibratory feeder
Complete protection functions include: main output overcurrent protection, overheating or overcooling protection, power supply undervoltage/overvoltage protection, control
output short circuit protection, 24V output short circuit protection, speeregulation 5V output short circuit protection, and motor stall protection
